*The Carbonio system is a true cold air intake, with a no
compromises install (eg you don't have to cut and lengthen the factory MAF wires
like some other kits) making it 100% reversible
*The Carbonio kit has been on the market longer than any other intake, they
pioneered the way that others have simply followed.
*Carbonio manufacturers intakes and intakes only, they know intakes better than
anyone else; it’s what they specialize in.
*We've sold over 300 2.5L intake systems since their release and aside from a
support back revision early on the very few issues we've encountered have been
from installation error and easily corrected by the end user.
*You WILL NOT experience any check engine lights related to the intake if
it’s properly installed, guaranteed.
*Also know that you will receive similar if not identical car/car gains with ANY
cold air intake (not short ram) on the market: Reason being the air into the MAF
has to be limited to avoid causing the ECU to run lean, there's no way around
this so maximum power is limited as a result. The Carbonio system is designed to
provide the maximum gains allowable without causing the afore mentioned CEL,
which is caused by too much air volume, simply put there is no way to get more
gains than what the ECU will allow the system to produce from the additional air
flow.
*Affordability, While not the cheapest system on the market its not the most
expensive either, with Carbonio you’re paying for a quality product properly
engineered and developed, the only thing that has been updated on the kit since
its release last April has been a support bracket and auxiliary installation
hardware (both were upgraded to better components)